Today, the company's technology experts from the peak grand introduce you how to flush water regulator shaker: rinse water consists of two parts in the use of the shaker: part together with the ore to mineral water to enter; the other part is directly given to the bed wash water surface. Lateral flow to be adjusted appropriately, on the one hand should be loose enough to make the bed, and to ensure that the uppermost light mineral water can be washed away, this must be the bed surface of the water layer to cover the bed. On the other hand, they must ensure that the density of large mineral particles can be in the bed surface subsidence, so the lateral water velocity and water also should not be too large. The amount of wash water and the bed cross slope concerned, within certain limits, "Dapo small water" and "Xiaopo flood" sorting can get similar results. When the slope increases, can reduce the amount of rinse water river, but reduce the amount of rinse water increases the slope of the way, will make a different density mineral zonation narrows. When the high quality requirements of heavy minerals, are generally increases with a smaller slope wash water solution. Rinse water and the bed slope is often adjusted operating factors, when both appropriate adjustment in the bed surface area will be stratified flow distribution, can not afford to wave, no piles of ore, with a clear distinction between selection, bandwidth and thin, fit the width of the bed without mine. Flush water regulating this aspect introduced here, hope the above can help to you.